 BOP
- 100W, 200W, 400W
- Programmable
- Linear
- Bipolar
- Optional GPIB or RS232
 Optional ethernet control either
through a web page or by using SCPI
commands via Telnet.
- Voltage/Current stabilizer
- Option L optimized for inductive/magnet
loads
- Option C optimized for capacitive loads.
|
 BOP-MG 1KW
BOP-ME 1KW
- 1000W
- Bipolar
- 4-quadrant
- Source-sink
- Energy recuperation
- Analog/digital control
- GPIB programmable(MG Suffix)
- LAN/Ethernet programmable (ME Suffix)
- Voltage/Current stabilizer
|
 BOP-GL 1KW
BOP-EL 1KW
- 1000W
- Bipolar
- Optimized for inductive loads
- 4-quadrant
- Source-sink
- Energy recuperation
- Analog/digital control
- GPIB programmable(GL Suffix)
- LAN/Ethernet programmable (EL Suffix)
- Voltage/Current stabilizer
|
KLP
- Full 1200W output
- 0 - 10V to 0 - 600V
- GPIB, RS 232 standard
- Optional: GPIB, LAN (LXI)
- External analog programmable
- Precision
- Digital
- Voltage/Current stabilizer
- Input 88-265V a-c
- 19 in. x 1U
- RODC circuit (Option R) rapidly discharges output capacitance, significantly reducing response time to reductions in output voltage
 |
 
KLN
- 750W (1U, half rack)
- 1500W (1U, full rack)
- 3000W (2U, full rack)
- Input Voltage:
• 750W, 1500W: 100 ~ 240V a-c,
127 ~ 373V d-c
• 3000W: 190 ~ 240V a-c,
254 ~ 370V d-c
- Low-profile
- automatic crossover
- high-performance
- low-cost
- stable
- programmable
- Analog and RS 485 programming
- GPIB or LAN Interface optional
- 39 Models: 0-6V to 0-600V, up to 400A
 |
 KLN Extended Range
- 5KW, 10KW, 15KW
- switching power supply
- Output: 80/ 250/ 350/ 500/ 650Vd-c
- Constant power
- a-c to d-c converter
- Input: 3-phase universal a-c, 180-460V a-c, 47/63Hz with PFC >0.95
- programmable voltage/current
- RoHS compliant
- forced current share for parallel operation
- LAN (LXI) interface included
- Built-in Solar Array Simulation
- Store up to 16 preprogrammed sequences
- Parallel up to 10 units (master/slave)
- Optional GPIB, USB, Serial interfaces
- Optional Isolated Analog Programming
|
 KLR
- 2400W
- Rectangular output
From 0 - 20V to 0 - 300V
- GPIB, RS 232 standard
- Optional: GPIB, LAN
- External analog programmable
- Precision
- Digital
- Voltage/Current stabilizer
- Input 200-240V a-c
- 19 in. x 1U
- RODC circuit (Option R) rapidly discharges output capacitance, significantly reducing response time to reductions in output voltage.
|
EL Electronic Load
- DC Electronic Load
- For testing power
sources:
• Batteries
• Power supplies
• Generators
• Chargers
• Fuel cells, etc.
- 1KW to 5KW Modules
- Scalable
- 19 in. x 4U
|
 BOP-HV
- 40W
- 500V, 1000V
- Bipolar
- Linear
- Programmable
- Voltage/Current stabilizer
|
 BHK-MG
- 200W, 40W
- Linear
- Programmable
- GPIB
- High Voltage:
300/ 500/ 1000/ 2000V
- Voltage/Current stabilizer
|
 ATE
- 50W, 100W, 250W,
500W, 1000W
- Precision
- Linear
- Programmable
- Voltage/Current stabilizer
- 1 Output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/
150V d-c
|
 ATE-DMG
- 1000W
- Precision
- Digital
- Linear
- GPIB
- Programmable
- Voltage/Current stabilizer
|
 JQE
- 100W, 250W,
500W, 1000W
- Linear
- Programmable
- V stabilizer
- Analog programmable
- Input: 115/230V a-c
- 1 Output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/
150V
|
 HSP
- 1000, 1500W
- Hot swap
- N+1, redundancy
- PFC
- Switching power supply
- Wide range a-c input
- 1 Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48/ 125V
|
 HSF
- 50W, 100W, 150W, 300W,
600W, 1200W, 1500W
- Hot swap, N+1
- Switching power supply
- 1 Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48V
- Wide range input:
95-264V a-c/125-370V d-c
|
 HSF-1UR
- 50W, 100W, 150W
- 1U Profile
- Hot swap, N+1
- Switching power supply
- 1 Output: 5/ 12/ 15/ 24/ 28/ 48V
- Wide range input:
95-264V a-c/125-370V d-c
|
 TBC
- 300W, 600W,
1500W, 3000W
- Battery charger
- Built in Float-Equalize selector with timer
- Rack/wall-mount
- Input: 115/230V a-c (1500/3000W: 230V
a-c only)
- 1 Output 12, 24, 48V d-c
|
 MST
- 200, 400W
- Programmable
- Switcher
- PFC
- Voltage/Current stabilizer
- IEEE 1118/GPIB Bus
- Input: 100-240V a-c/ 24/ 28/ 48V d-c
- 1 Output: 0 to 6/ 15/ 25/ 40/ 55/ 65/
75/ 100/ 150V d-c
|
 MAT
- 360, 720, 1080W
- Programmable
- IEEE 1118 Bus
- Optional GPIB Adapter
- Voltage/Current stabilizer
- Input: 115/230V a-c
- 1 Output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/
150V
|
 ABC
- 100W
- Precision
- Programmable
- GPIB
- Digital
- Voltage/Current stabilizer
- 1 Output: 0 to 10/ 15/ 25/ 36/ 60/ 125V
|
 MPS
- 70W
- Low noise
- Voltage stabilizer
- Overvoltage Crowbar
- Adjustable Current Limit
- Bench
- Input: 115/230V a-c
- 3 outputs:
• 0 to 6V (with OVP) / 0 to 5A
• 0 to +20V / 0 to 1A
• 0 to -20V / 0 to 1A
|
 MSK
- 100W
- Linear
- Bench-top
- Input: 115/230V a-c
- 1 Output: 0 to 10/ 20/ 40/ 60/ 126V d-c
|
 PAT
- 20W
- Linear
- Programmable
- Voltage/Current stabilizer
- input: 115/230V a-c
- 1 Output: 0 to 7/ 15/ 21/ 40/ 72/ 100V d-c
|
 PRR
- 1000W
- Fixed output
- Ferroresonant
- Rack Mount
- Voltage Stabilizer
- Input: 120V a-c
- 1 Output: 12/ 24/ 28/ 48V d-c
|
 PTR
- 60W
- Linear
- Programmable
- Voltage/Current stabilizers
- Separate V/C stabilization channels
- Input: 115/230V a-c
- 1 Output: 0 to 7/ 15/ 21/ 40/ 72/ 100V d-c
|
 CC
- 20W
- Linear
- Programmable
- fast-recovery
- Current Stabilizer
- Input: 115/230V a-c
- 1 Output: 0-7/ 15/ 21/ 40/ 72/ 100V d-c
|
 MBT
- 360W
- Linear
- Programmable
- Voltage/Current stabilizer
- Keypad
- LCD
- IEEE 1118 (serial) bus
- GPIB and RS 232 optional
- Input: 115/230V a-c
- 1 Output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/
150V d-c
|
PCX-MAT
- 20W
- Linear
- Programmable
- High speed
- Voltage Stabilizer
- Bench/Rack Mount
- Input: 115/230V a-c
- 1 Output: 0-7/ 15/ 21/ 40/ 72/ 100/
200V d-c
|
|
|
