Standard Models include
E option Models include
G option models include
N/A = Not Available
* Standard Models include
E option Models include
G option models include
N/A = Not Available
Standard Models include
E option Models include
G option models include
N/A = Not Available
Select Options: 750W, 1500W, 3000W
Option C. Conformal Coating
Note any custom modification requests in the Reason For Query box below.
Select Options: 5KW, 10KW, 15KW (Extended Range)
Select Interface:Standard. Includes LAN (LXI) and USB InterfacesG Option. Includes GPIB Interface in addition to LAN (LXI) and USB InterfacesS Option. Includes Serial Port (RS 422/RS 485) in addition to LAN (LXI) and USB InterfacesA Option. Includes Isolated Analog Interface in addition to LAN (LXI) and USB InterfacesOption C. Conformal Coating
Note any custom modification requests in the Reason For Query box below.
Select Accessories: 750W, 1500W, 3000W Models
RA 81-1 Rack Mount Kit (Single, (750W models only). Allows mounting of one half-rack KLN 750W unit in standard 19-inch rack (L-type brackets are supplied with unit, not included in Kit).RA 81-2 Rack Mount Kit (Dual, 750W models only). Allows mounting of two half-rack KLN 750W units side-by-side in standard 19-inch rack (L-type brackets are supplied with unit, not included in Kit).Parallel Connector Board, P/N 536-0129. Provides convenient connections for parallel operation of up to five units.Series Connector Board, P/N 536-0130. Provides convenient connections for series operation of two units.Mating Connector for Parallel or Series Connector Board, P/N 142-0504. 2-pin connector, mates with ExtCV, ExtCC, Vmont, Amont and RCL connectors on Parallel Connector Board 536-0129 or Series Connector Board 536-0130.Cable Assembly P/N 118-0506. Facilitates connection to ExtCV, ExtCC, Vmont, Amont or
RCL connectors on Parallel or Series Connector Board. Twisted pair (24 in.),RD/W-BK, terminated with 142-0504 connector (see above), and unterminated at the other end..Programming Port Cable, P/N 518-0119. Provides connections between two programming ports for parallel and series operation.Chassis Slides, Model CS 07 Allows installation of full rack 1U and 2U KLN models in standard 19-inch wide cabinet (30 inches deep, minimum).Parallel Connection Cable, P/N 518-0121 Connects PROGRAMMING CONTROL port of two units to provide parallel connections without the need for a Parallel Connector Board.Knob, White, P/N 555-0003 Replacement for front panel encoder.Bracket, P/N 128-2417 Used to attach two 1500W power supplies stacked one on top of the other. Four (4) required (two on each side).Side Support Bracket (Pair), P/N 128-2569 Provides side support for rack-mounted units. Recommended for 3000W KLN Series..
Select Accessories: 5KW, 10KW, 15KW Models
Bracket (pair), P/N 128-2495 Provides side support for rack-mounted units. (14.95 in. long)L-bracket, Left, P/N 128-2496 Used to install bus bars for parallel operation on units with horizontal output terminals.L-bracket, Right, P/N 128-2497 Used to install bus bars for parallel operation on units with horizontal output terminals. Knob, White, P/N 555-0003 Replacement for SELECT control.Knob, White, P/N 555-0002 Replacement for VOLTAGE or CURRENT control.Bus Bar, P/N 172-0680 Used to connect six stacked units in parallel.Bus Bar, P/N 172-0681 Used to connect ten stacked units in parallel.
Project Name:
Quantity:
For quantity discounts please use Reason for Query box to indicate models, quantities and delivery requirements (if known).
Reason for Query:
(Please include your application and any special needs)
Contact Information:
NOTE: Required information is indicated in BOLD
