| KLN SERIES OUTPUT CHARACTERISTICS: 750W, 1500W, 3000W | ||||||||||||
| Specification | Rating/Description | |||||||||||
| Type of Stablizer |
Constant Voltage (CV) / Constant Current (CC), automatic crossover |
|||||||||||
| Adjustment Range | Voltage: | 0 to 100% of rated voltage | ||||||||||
| Current: | 0 to 100% of rated current | |||||||||||
| Protective functions |
|
Programmable overvoltage (OVP) Programmable overcurrent (OCP) Overtemperature (OTP) Fuse blown |
||||||||||
| Protection setting range | Overvoltage: |
0 to 110% of rated voltage |
||||||||||
| Overcurrent: | 10 to 110% of rated current | |||||||||||
| Parallel Operation | Up to 5 units maximum, automatic load sharing | |||||||||||
| Current Sharing Tolerance: |
1% at rated current, 5% at 50% of rated current, 10% at less than 10% of rated current |
|||||||||||
| Series Operation | 2 units maximum (total voltage must not exceed 600V) | |||||||||||
| Temperature. Coefficient | 100ppm/°C of rated output Voltage or Current, after 30 minute warm-up | |||||||||||
| Temperature Drift | 0.05% of rated Vout (CV) or Aout (CC) over 8hrs interval following 30 minutes warm-up. Constant line, load and temperature. | |||||||||||
|
Transient response time (Constant Voltage mode) |
20V and under: | ≤1.5ms | ||||||||||
| 30V~100V: | ≤1ms | |||||||||||
| 150V~600V: | ≤2ms | |||||||||||
| Hold-up Time | 20ms | |||||||||||
