| KLN SERIES OUTPUT CHARACTERISTICS: 5KW, 10KW, 15KW | ||||||||||||
| Specification | Rating/Description | |||||||||||
| Type of Stablizer |
Constant Voltage (CV) / Constant Current (CC), auto crossover (1) |
|||||||||||
| Adjustment Range | Voltage: | 0 to 105% of rated voltage | ||||||||||
| Current: | 0 to 105% of rated current | |||||||||||
| Protective functions |
|
Programmable overvoltage (OVP) Programmable overcurrent (OCP) Overtemperature (OTP) Source Power Fail |
||||||||||
| Protection setting range | Overvoltage: |
0 to 110% of rated voltage |
||||||||||
| Overcurrent: | 0 to 110% of rated current | |||||||||||
| Remote Error Sense Compensation | 5V max. | |||||||||||
| Source Effect | Voltage: | ±0.02% of rated voltage (2) | ||||||||||
| Current: | ±0.05% of rated current (2) | |||||||||||
| Power: | ±0.05% of maximum power (2) | |||||||||||
| Load Effect | Voltage: | ±0.05% of rated voltage (3) | ||||||||||
| Current: | ±0.15% of rated current (4) | |||||||||||
| Power: | ±0.75% of maximum power (5) | |||||||||||
| Parallel Operation | Up to 10 units maximum, automatic load sharing | |||||||||||
| Series Operation | 2 units maximum | |||||||||||
| Temperature. Coefficient | 100ppm/°C of rated output Voltage or Current, after 30 minute warm-up | |||||||||||
| Response time | Full load (up) | <0.03 Sec | ||||||||||
| Full load (down) | <0.08 Sec | |||||||||||
| No load (down) |
80V to 350V: <30 Sec 250V and higher: 10 Sec | |||||||||||
|
Transient response time (6) (Constant Voltage mode) |
80V: | ≤1.5ms | ||||||||||
| 250V~650V: | ≤2ms | |||||||||||
| 1000V~1500V: | ≤3ms | |||||||||||
| Ground Polarity | Either positive or negative ground | |||||||||||
