|
|
- Constant Voltage/Constant Current with automatic crossover
- Switch mode topology for cool, efficient operation, speed control fans for low noise operation
- RoHS Compliant
- 1/2 rack, 1U panel height at 750 watts
- Full rack, 1U panel height at 1500 watts
- Full rack, 2U panel height at 3000 watts
- Full rack, 3U panel height at 5K, 10K and 15K watts (Extended Range models)
- Front to back air flow allows full power operation without spacers between supplies
- Up to 5 units (10 units for extended range models) in parallel and 2 units in series, equipped with active current sharing.
- CE Mark approved.
- Approved to LXI Version 1.4, Device Specification 2011
750W, 1500W, 3000W models only.
- RS 485 and isolated analog programming included on all models
- Optional LAN interface (E suffix models)
- Optional GPIB interface (G suffix models)
- Wide-range a-c input, 100-240V a-c, 50/60Hz with PFC
5KW, 10KW and 15KW Extended Range models only.
- LAN (LXI) interface included on standard models (E suffix) and on all models with an optional interface
- Built-in Solar Array Simulation for Maximum Power Point Tracking function, either multiple or single I-V curve
- Store up to 16 preprogrammed sequences of up to 500 steps, 8000 steps total.
- Parallel up to 10 units (master/slave) for increased output power/current capability
- Optional GPIB interface (G suffix models)
- Optional Isolated Analog Programming interface (A suffix models)
- Optional USB interface (U suffix models) *
- Optional Serial Port (RS 422/485) interface (S suffix models) *
- Three phase universal a-c input, 180-460V a-c, 47/63Hz with PFC >0.95
* USB and Serial Port (RS 422/RS 485) options are currently under development.
|
