| KLN 750W MODEL TABLE | ||||||||||||
|
MODEL (8) (9) (10) |
d-c Output Range | Ripple (3) | Line Regulation(5) (11) | Load Regulation(11) | Response Time(7) |
Remote Sense Voltage Drop (max) (V) |
||||||
|
CV (1) (V d-c) |
CC (2) (A d-c) |
CV (mV rms) |
CC (4) (mA rms) |
CV (0.05% +mV) |
CC (0.1% +mA) |
CV(6) (0.05% +mV) |
CC(6) (0.1% +mA) |
Full Load Up (Sec) |
Full Load Down (Sec) |
No Load Down (Sec) |
||
| KLN 6-100 | 0-6 | 0-100 | 10 | 180 | 2.8 | 11 | 2.8 | 23 | 0.08 | 0.05 | 0.6 | 1 |
| KLN 8-90 | 0-8 | 0-90 | 10 | 180 | 2.8 | 11 | 2.8 | 23 | 0.08 | 0.05 | 0.6 | 1 |
| KLN 12.5-60 | 0-12.5 | 0-60 | 10 | 120 | 4 | 8.5 | 4 | 18 | 0.08 | 0.05 | 0.8 | 1 |
| KLN 20-38 | 0-20 | 0-38 | 10 | 76 | 4 | 5.8 | 4 | 12.6 | 0.08 | 0.05 | 0.8 | 1 |
| KLN 30-25 | 0-30 | 0-25 | 10 | 63 | 5 | 4.5 | 5 | 10 | 0.08 | 0.08 | 0.9 | 1.5 |
| KLN 40-19 | 0-40 | 0-19 | 10 | 48 | 6 | 3.9 | 6 | 8.8 | 0.08 | 0.08 | 1 | 2 |
| KLN 50-15 | 0-50 | 0-15 | 10 | 43 | 8 | 3.6 | 8 | 8.2 | 0.08 | 0.08 | 1.1 | 2 |
| KLN 60-12.5 | 0-60 | 0-12.5 | 10 | 38 | 8 | 3.25 | 8 | 7.5 | 0.08 | 0.08 | 1.1 | 3 |
| KLN 80-9.5 | 0-80 | 0-9.5 | 10 | 29 | 10 | 2.95 | 10 | 6.9 | 0.15 | 0.15 | 1.2 | 4 |
| KLN 100-7.5 | 0-100 | 0-7.5 | 10 | 23 | 12 | 2.75 | 12 | 6.5 | 0.15 | 0.15 | 1.5 | 5 |
| KLN 150-5 | 0-150 | 0-5 | 16 | 18 | 17 | 2.5 | 17 | 6 | 0.15 | 0.15 | 2 | 5 |
| KLN 300-2.5 | 0-300 | 0-2.5 | 25 | 13 | 32 | 2.25 | 32 | 5.5 | 0.15 | 0.15 | 3 | 5 |
| KLN 600-1.25 | 0-600 | 0-1.25 | 75 | 8 | 62 | 2.13 | 62 | 5.26 | 0.25 | 0.3 | 4 | 5 |
| NOTES: | |
| (1) | Actual output voltage should be ≤0.1% of rated voltage when output voltage is set to zero. |
| (2) | Actual output current should be ≤0.1% of the rated current when output current is set to zero (resistive load). |
| (3) | Measured when output is within 10%-100% of rated value; ripple bandwidth: 300kHz (rms), noise bandwidth: <20MHz (p-p). |
| (4) | For 6V model: measured when output voltage 2-6V at rated current; all other models measured when output 10-100% of rated voltage and rated current. |
| (5) | Input voltage 100-240VAC, 50/60Hz. |
| (6) | Constant input voltage and output from 10% of loading to full load. |
| (7) | Rated input, resistive load. |
| (8) | Rated power output with input 115V or 230V a-c. |
| (9) | Specifications met after 30 minutes of operation, ambient temperature 23±5°C, humidity under 80% R. H, a-c input voltage ±5% of nominal, THD is 2%, not using the remote compensation, not operating in series or parallel. |
| (10) |
- Add G suffix for models with optional GPIB interface. - Add E suffix for optional LAN interface. - Add C suffix for conformal coating - See KIT 219-0608 to retrofit LAN interface into non-E suffix models. |
| (11) | For example, the spec for KLN 6-100 line regulation and load regulation in CV mode is 0.05% + 2.8mV (or 6 x 0.0005) = ±3mV +2.8mV = 5.8mV, so line and load regulation are within 0.2mV to 5.8mV for 6V model. |
