Select Cable Kits
KIT 219-0449 - (2 units in parallel, increase current)
KIT 219-0446 - (3 units in parallel, increase current)
KIT 219-0447 - (4 units in parallel, increase current)
KIT 219-0448 - (5 units in parallel, increase current)
KIT 219-0443 - (2 units in series, increase voltage)
KIT 219-0444 - (3 units in series, increase voltage)
KIT 219-0480 - 2 x 2 Cables: 2 parallel branches of 2 series-connected units.
KIT 219-0481 - 3 x 2 Cables: 2 parallel branches of 3 series-connected units.
KIT 219-0436 - RS 232 KIT - Contains RJ11 to RJ45 Patch cord, RJ 45 Patch cord, two RS 232 adapters (one w/male pins for DTE equipment, one w/female pins for PC) and two RS 232 Loop Back test Connectors (one 6-pin and one 8-pin).
Select Upgrade Kits
These Kits upgrade the BOP 1KW from earlier firmware versions to Version 3.05 (which has the solar tester capability).
Find Firmware Version. These Kits are NOT applicable to Firmware Versions 3.05 and higher.
KIT 219-0533 - Upgrade Kit for Enhanced Functionality (Solar Cell Testing). This option requires user calibration after installing upgrade
KIT 219-0533-[serial number] - Upgrade Kit for Enhanced Functionality (Solar Cell Testing). This option requires user submission of serial number and includes factory calibration constants, so user calibration not required.
No Options available. Use the
Reason For Query box below for inquiries about GL Series Volt-Ampere combinations not listed, or for any custom modification requests.
Line Cord Set P/N 118-1087 (250V/20A, provides connection to a-c mains
via Nema 6-20P connector)
Line Cord Set P/N 118-1088 (250V/20A, provides connection to a-c mains
via Nema L6-20P locking type connector)
Mating Connector, Trigger Port P/N 142-0527
Mating Connector, IEEE 1118 (BITBUS) Port P/N 142-0485
Mating Connector, Analog Input Port: (D-Subminiature Connector, 15 Pins, Male P/N 142-0449
Hood for 15-pin D-Subminiature Connector P/N 108-0374
SNC 488-1 IEEE 488 (GPIB) Cable (1 meter)
SNC 488-2 IEEE 488 (GPIB) Cable (2 meter)
SNC 488-4 IEEE 488 (GPIB) Cable (4 meter)
Chassis Slides Model CS 04
Output Terminal Cover P/N 129-0423 - Protects against contact with output and barrier strip terminals. Particularly recommended for 72V and 100V models for safety purposes. Consult
factory for parallel/series configurations.
For quantity discounts please use Reason for Query box to indicate models, quantities and delivery requirements (if known).
Reason for Query:
(Please include your application and any special needs)
NOTE: Required information is indicated in type. BOLD