KEPCO, INC. CE MARKED PRODUCTS

ALL Kepco products listed on this page carry the CE Mark.

CE MARKED INSTRUMENT POWER SUPPLIES

BOP 100W, 200W, 400W Programmable Linear Bipolar Optional GPIB or RS232 Optional ethernet control either through a web page or by using SCPI commands via Telnet. Voltage/Current stabilizer Voltage/Current stabilizer Option L optimized for inductive/magnet loads Option C optimized for capacitive loads.	BOP-MG 1KW 1000W Bipolar 4-quadrant Source-sink Energy recuperation Analog/digital control Programmable Voltage/Current stabilizer	BOP-GL 1KW 1000W Bipolar Optimized for inductive loads 4-quadrant Source-sink Energy recuperation Analog/digital control Programmable Voltage/Current stabilizer
KLP Full 1200W output 0 - 10V to 0 - 600V GPIB, RS 232 standard Optional: GPIB, LAN (LXI) External analog programmable Precision Digital Voltage/Current stabilizer Input 88-265V a-c 19 in. x 1U RODC circuit (Option R) rapidly discharges output capacitance, significantly reducing response time to reductions in output voltage	KLN 750W (1U, half rack) 1500W (1U, full rack) 3000W (2U, full rack) Input Voltage: • 750W, 1500W: 100 ~ 240V a-c, 127 ~ 373V d-c • 3000W: 190 ~ 240V a-c, 254 ~ 370V d-c RoHS compliant Low-profile automatic crossover high-performance low-cost stable programmable Analog and RS 485 programming GPIB or LAN Interface optional 39 Models: 0-6V to 0-600V, up to 400A	KLR 2400W Rectangular output From 0 - 20V to 0 - 300V GPIB, RS 232 standard Optional: GPIB, LAN External analog programmable Precision Digital Voltage/Current stabilizer Input 200-240V a-c 19 in. x 1U RODC circuit (Option R) rapidly discharges output capacitance, significantly reducing response time to reductions in output voltage.
EL Electronic Load DC Electronic Load For testing power sources: • Batteries • Power supplies • Generators • Chargers • Fuel cells, etc. 1KW to 5KW Modules Scalable 19 in. x 4U	BOP-HV 40W 500V, 1000V Bipolar Linear Programmable Voltage/Current stabilizer	BHK-MG 200W, 40W Linear Programmable GPIB High Voltage: 300/ 500/ 1000/ 2000V Voltage/Current stabilizer
ATE 50W, 100W, 250W, 500W, 1000W Precision Linear Programmable Voltage/Current stabilizer 1 Output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/ 150V d-c	ATE-DMG 1000W Precision Digital Linear GPIB Programmable Voltage/Current stabilizer	JQE 100W, 250W, 500W, 1000W Linear Programmable V stabilizer Analog programmable Input: 115/230V a-c 1 Output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/ 150V
HSP 1000, 1500W Hot swap N+1, redundancy RoHS compliant PFC Switching power supply Wide range a-c input 1 Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48/ 125V	HSF 50W, 100W, 150W, 300W, 600W, 1200W, 1500W Hot swap, N+1 Switching power supply 1 Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48V Wide range input: 95-264V a-c/125-370V d-c	HSF-1UR 50W, 100W, 150W 1U Profile Hot swap, N+1 Switching power supply 1 Output: 5/ 12/ 15/ 24/ 28/ 48V Wide range input: 95-264V a-c/125-370V d-c
MST 200, 400W Programmable Switcher PFC Voltage/Current stabilizer IEEE 1118/GPIB Bus Input: 100-240V a-c/ 24/ 28/ 48V d-c 1 Output: 0 to 6/ 15/ 25/ 40/ 55/ 65/ 75/ 100/ 150V d-c	MAT 360, 720, 1080W Programmable Voltage/Current stabilizer IEEE 1118 Bus Optional GPIB Adapter input: 115/230V a-c 1 Output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/ 150V	ABC 100W Precision Programmable GPIB Digital Voltage/Current stabilizer 1 Output: 0 to 10/ 15/ 25/ 36/ 60/ 125V
PAT 20W Linear Programmable Voltage/Current stabilizer input: 115/230V a-c 1 Output: 0 to 7/ 15/ 21/ 40/ 72/ 100V d-c	CC 20W Linear Programmable fast-recovery Current Stabilizer Input: 115/230V a-c 1 Output: 0-7/ 15/ 21/ 40/ 72/ 100V d-c

CE MARKED MODULAR POWER SUPPLIES

AD 1500W (500W, 800W, 3000W coming soon) switching power supply a-c to d-c, d-c to d-c converter Input: Universal, PFC, 90-264V a-c/127-370V d-c 1 output: 12/ 15/ 24/ 30/ 36/ 48/ 60V, 120V, 150V, 250V, 400V d-c aux output: +5.0V/1.0A Parallel operation via CANBUS Built-in ORing FETs Intelligent GUI to set/monitor parameters PMBus, MODBUS, RS 232/RS 485, I²C RoHS compliant Low cost Programmable voltage/current 0-105% Forced current share for parallel operation	AE 800W, 1500W, 3000W switching power supply a-c to d-c, d-c to d-c converter Input: Universal, PFC, 90-264V a-c/127-370V d-c 1 output: 12/ 15/ 24/ 30/ 36/ 48/ 60V d-c selectable aux output RS 232/RS 485/I²C, RoHS compliant Low cost Programmable voltage/current 0-105% Forced current share for parallel operation	AEK 3000W switching power supply a-c to d-c, d-c to d-c converter Input: Universal, PFC, 90-264V a-c/127-370V d-c 1 Output: • LV: 12/ 15/ 24/ 30/ 36/ 48/ 60V d-c • HV: 150/ 200/ 250/ 400V d-c Selectable aux output RS 232/RS 485/I²C, Programmable voltage/current RoHS compliant Forced current share for parallel operation Low cost
HSM 1000W, 1500W Switching Power Supply RoHS compliant N+1 redundancy Wide range a-c input PFC 1 Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48/ 125V	PAT 20W Linear Programmable Voltage/Current stabilizer Input: 115/230V a-c 1 Output: 0 to 7/ 15/ 21/ 40/ 72/ 100V d-c	PRM 60W, 120W, 180W, 280W, 300W, 450W Linear Ferroresonant Voltage Stabilizer Input: 115V a-c 1 Output (fixed):5/ 8/ 12/ 15/ 21/ 24/ 26/ 28/ 36/ 48/ 60/ 120/ 240V d-c
HWS 300, 600, 1000, 1500W Remote Programmable Limited lifetime warranty UL 508 approved RoHS compliant Small Size Fully enclosed, 1 Output: • 300W, 600W: 3.3/ 5/ 12/ 15/ 24/ 48V d-c • 1000W, 1500W: 3.3/ 5/ 6/ 7.5/ 12/ 15/ 24/ 36/ 48/ 60V d-c Semi F47 Compliant (high line a-c) Universal input (85-265V a-c)	RTW 50W, 100W, 150W, 300W Switching power supply A-c to d-c converter RoHS compliant Small footprint PFC Input: Wide range input: 85-265V a-c 1 Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48 d-c FCC/VDE Class B compliance Remote on/off	MTW 15W, 30W, 60W, Wide range input: 90-264V a-c/130-370V d-c 3 Outputs: +5/±12V d-c RoHS compliant
KHX 300W, 1000W, 1500W Switching Power Supply Operates in extreme wet and hot environments. Outdoor rated enclosure IAW NEMA types 3, 3R, 4, 6 or IEC IP65, IP66, IP67, IP68, IP69. Submersible, conforms to IP68 and NEMA6. Withstand high temperature (steam)/high pressure water-jets. Explosion-Proof RoHS compliant N+1 redundancy Wide range a-c input, PFC 1 Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48/ 125V

CE MARKED PLUGGABLE/HOT SWAPPABLE SUPPLIES

HSF 300W, 600W, 1200W, 1500W, Hot swap, N+1 Switching power supply RoHS compliant 1 Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48V Wide range input: 95-264V a-c/125-370V d-c,	HSF 50W, 100W, 150W RoHS compliant Hot swap, N+1 Switching power supply 1 Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48V Wide range input: 95-264V a-c/125-370V d-c	HSF-1UR 50W, 100W, 150W 1U Profile Hot swap, N+1 Switching power supply 1 Output: 5/ 12/ 15/ 24/ 28/ 48V Wide range input: 95-264V a-c/125-370V d-c,
HSP 1000, 1500W Hot swap N+1, redundancy RoHS compliant PFC Switching power supply Wide range a-c input 1 Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48/ 125V	MAT 360, 720, 1080W Programmable V/C stabilizer IEEE 1118 Bus Optional GPIB Adapter input: 115/230V a-c 1 Output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/ 150V d-c	MST 200, 400W Programmable Switcher PFC V/C stabilizer IEEE 1118/GPIB Bus Input: 100-240V a-c/ 24/ 28/ 48V d-c 1 Output: 0 to 6/ 15/ 25/ 40/ 55/ 65/ 75/ 100/ 150V d-c
KHX 300W, 1000W, 1500W Switching Power Supply Operates in extreme wet and hot environments. Outdoor rated enclosure IAW NEMA types 3, 3R, 4, 6 or IEC IP65, IP66, IP67, IP68, IP69. Submersible, conforms to IP68 and NEMA6. Withstand high temperature (steam)/high pressure water-jets. Explosion-Proof RoHS compliant N+1 redundancy Wide range a-c input, PFC 1 Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48/ 125V

CE MARKED PROGRAMMERS/CONTROLLERS/INTERFACES

BIT 802E (Ethernet control) Controls BOP via web pages and socket interfaces. Setup using web page. Labview G, C drivers. LXI version 1.4 compatible Soft Calibration Dual-range 16-bits 15 bits resolution for full and 1/4 scale of output. Arbitrary waveform generator.	BIT 4886 Connects BOP to IEEE 488.2 Bus Talk/listen support 16-bit Resolution of 1/2¹⁶ Supports SCPI/CIIL PC Card inserted in BOP	MST 488-27 Interface between IEEE 488.2 or RS 232 and Kepco Control bus (IEEE 1118). Controls up to 27 Kepco power supplies (MAT, MBT, MST, BOP, etc.) Remote control to 1000 ft. Supports SCPI/CIIL Modular (1/9 rack width) Fits RA 55/CA 400 Rack Adapter used with MST power supplies.
SN 488 Digital Programmer 1 or 2 Channels IEEE 488 Listener for Kepco's Programmable Models (JQE , ATE,PAT, PTR etc.) Precise 0-10V analog output	SNR 488 Digital Programmer Multi-channel D/A Conversion IEEE 488 Listener for up to 8 Programmable Models (JQE, ATE, PAT, PTR etc.) Input: Hex or 3-bit BCD Output: Precise 0 to ±10V or ±1V analog

Products • Support • Literature • Contact Us • Careers • About

KEPCO, INC. • 131-38 SANFORD AVENUE • FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000 • FAX (718) 767-1102
www.kepcopower.com • email: hq@kepcopower.com

Products

Applications

Support

Literature

Contact Us

About

Careers

BATTERY CHARGERS

CE Marked Products