| BOP 1 KILOWATT FUNCTION GENERATOR CHARACTERISTICS | ||||||||||||
| Specification | Rating/Description | Condition | ||||||||||
| LIST Command Characteristics for 'String' Type Waveforms (Remote Only) |
Maximum number of points: - For single (global) dwell time: 5900 (high resolution) - For <122 different dwell times: 3933 - For >126 different dwell times: 2950 Dwell time range: 93usec to 34msec Dwell time Resolution (increment: 0.751 usec Skip feature (a number of steps can be skipped from the LIST at the first run using L1ST:COUN:SKIP) Able to synchronize a LIST command with multiple BOP'S or other devices using Trigger Port. Able to sample output voltage or current during LIST command execution. |
NOTE: Dwell time list must match (balance) the amplitude list | ||||||||||
| Waveform Graphics Displayed on LCD (1) for Both Local and Remote Operation |
Local (1): The LCD (1) represents the programming waveform graph of the
main channel, voltage for voltage mode or current for current mode. There is no difference between programmhg and real output waveform, as long as programmed Limits are not exceeded and the load is resistive. The programming waveform representation does not take into account the interaction between settings and load. The graph timing is automatically selected for the best waveform representation. Remote: When using LIST commands for waveform creation/execution, the LCD displays the actual or real waveform graphs of the main and limit channel, voltage and current protection limit for voltage mode and current and voltage protection limit for current mode. Main and Limit graphs are not phase correlated. In order to get a meaningful representation, the graph timing must be chosen properly. It is recommended that the first value higher than total waveform time be chosen from the 12 time selections, spread from 0.04 second to 75 seconds. |
|||||||||||
(1) Local operation and LCD applies to -MG and -ME models only.
