Follow @kepco_careers
Advanced Search
Kepco Power Solutions
718-461-7000
SERIES BOP HIGH POWER Download Product Specifications (PDF)
TOUR PREVIOUS NEXT
MODELS
Link To Request Quote Page
FEATURES
FUNCTION
GENERATOR
CHARACTERISTICS
LOCAL OPERATION
CONTROL
INTERFACE
CHARACTERISTICS
PROGRAMMING/
DISPLAY
CHARACTERISTICS
GENERAL
SPECIFICATIONS
INPUT
CHARACTERISTICS
OUTPUT
CHARACTERISTICS
  • PART 1
  • PART 2
  • PART 3
    		•
    PHYSICAL
    CHARACTERISTICS
    MANUALS
       BOP 1 KILOWATT OUTPUT CHARACTERISTICS (1)
    SPECIFICATION RATING/DESCRIPTION CONDITION
    MG Models GL Models
    Series Operation maximum 3 identical
    units    		 maximum 2 identical
    units (2) (3)    		 master/slave
    Parallel Operation maximum 5 identical
    units    		 maximum 2 identical
    units (2) (3)    		 master/slave
    Series-Parallel
    Operation    		 2 series x 2 parallel
    3 series x 2 parallel    		 Not available Master/slave for both series and
    parallel branches of identical MG units.
    Output
    Protection
    Limiting    		 Analog Adjustable between 10% and 101%
    of EOnom or IOnom     		Voltage and
    current limited in
    four quadrants.
    Digital Adjustable between ±Internal minimum
    (EOmin. or IOmin.) and ±1.01 EOnom. or IOnom.
    Output Stage
    Protection    		 Output overvoltage/overcurrent,
    Heatsink overtemperature,
    switchers overcurrent    		 Triggers latched shutdown protection
    of the output module and PFC stage.
    Recover by cycling power off, then on,
    or for MG models, by pressing RESET
    at the front panel.
    Input Stage
    Protection (PFC)    		 Internal overvoltage, undervoltage,
    overcurrent, heat sink overtemperature,
    fan inoperative
    Input circuit breaker overcurrent Trips circuit breaker to shut off unit.
    Small signal
    Bandwidth for
    main channel
    (analog or digital)    		 Voltage
    channel    		 2 KHz minimum 1 KHz minimum Into nominal resistive load,
    10% of rating
    Current
    channel    		 800 Hz minimum (4) Into short circuit, 10% of rating
    Rise/Fall time Voltage
    channel    		 300/300 µSec 475/475 µSec Into nominal resistive load, measured from
    10 to 90%, from 0 to ±100% of rating
    Current
    channel    		 500/500 µSec 500/500 µSec Into short circuit, measured from 10 to 90%,
    from 0 to ±100% of rating
    (1) Output characteristics are for a single standalone unit. Output characteristics of identical multiple unit parallel/series configurations are described in the Technical Manual associated with the applicable Cable Kit.
    (2) Consult factory to configure more than two units in series or parallel (more than three units in parallel for BOP 10-100GL/EL).
    (3) For multiple unit configurations, automatic shutdown upon accidental removal of the cable at the Master PAR/SER IN PROTECT PORT can be implemented with a simple internal modification. Consult factory for details.
    (4) 600 Hz minimum for BOP 6-125MG/ME.

    PREVIOUS TOP NEXT
    Products • Support • Literature • Contact Us • Careers • About

    KEPCO, INC. • 131-38 SANFORD AVENUE • FLUSHING, NY. 11355 U.S.A.
    TEL (718) 461-7000 • FAX (718) 767-1102
    www.kepcopower.com • email: hq@kepcopower.com