Follow @kepco_careers
Advanced Search
Kepco Power Solutions
718-461-7000
SERIES BOP HIGH POWER Download Product Specifications (PDF)
TOUR PREVIOUS NEXT
MODELS
Link To Request Quote Page
FEATURES
FUNCTION
GENERATOR
CHARACTERISTICS
LOCAL OPERATION
CONTROL
INTERFACE
CHARACTERISTICS
PROGRAMMING/
DISPLAY
CHARACTERISTICS
GENERAL
SPECIFICATIONS
INPUT
CHARACTERISTICS
OUTPUT
CHARACTERISTICS
  • PART 1
  • PART 2
  • PART 3
    • PHYSICAL
    CHARACTERISTICS
    MANUALS
       BOP 1 KILOWATT OUTPUT CHARACTERISTICS (1)
    SPECIFICATION RATING/DESCRIPTION CONDITION
    MG Models GL Models
    Digital
    Readback
    Characteristics    		 Measurement Rate 5 mS  
    Measurement Array 64 samples Voltage and current
    Rejection of line-
    related ripple/noise     		50, 60 or 125Hz Digital readback
    Voltage
    stabilization
    in Voltage
    Mode    		 Source Effect 0.05% of rating 0.01% of rating min-max input voltage,
    230V a-c reference
    Load Effect 0.1% of rating 0.02% of rating 0 - 100% load current
    Time Effect (drift) 0.02% of rating 0.01% of rating 0.5 - 8 hours
    Temperature Effect 0.02%/°C of rating 0.005%/°C of rating 0 - 50°C
    Ripple/Noise (2% EOmax) p-p (2) (5)/
    (0.2% EOmax) rms     		0.03% of rating (5)
    (rms)    		  
    Current
    stabilization
    in Current
    Mode    		 Source Effect 0.05% of rating 0.01% of rating min-max input voltage,
    230V a-c reference
    Load Effect 0.2% of rating 0.02% of rating 0 - 100% load current
    Time Effect (drift) 0.02% of rating 0.01% of rating 0.5 - 8 hours
    Temperature Effect 0.02%/°C of rating 0.005%/°C of rating 0 - 50°C
    Ripple/Noise (2% IOmax) p-p (2) (6)/
    (0.2% IOmax) rms    		 0.01% of rating (6)
    (rms)    		  
    Error Sensing 0.25V or 1% of voltage rating per
    wire (whichever is less)    		 Above rated output voltage (3)
    Transient
    Recovery
    in Voltage
    Mode    		 Maximum
    excursion    		 5% of nominal output nominal voltage,
    50% load step
    Recovery Time 200 μSec Return within 0.1%
    of set voltage
    Output
    Isolation
    Voltage    		 d-c or p-p 300V
    (500V for 10V models)    		 Output to chassis ground
    d-c leakage current 0.1mA @ 300V
    (0.1mA @ 500V for 10V -MG and -GL models)         		GND-NET to GND link not installed. (4)
    (1) Output characteristics are for a single standalone unit.
    (2) Includes switching noise.
    (3) Remote error sensing applies to the main voltage channel. Feedback for the ±voltage limit channels is supplied locally from the power terminals. Consult factory for a remote sensing solution applicable to the voltage limit channels.
    (4) With GND-NET to GND link installed: 0.55mA at 300V (0.91mA at 500V for 10V -MG and -GL models).
    (5) Full scale, nominal resistive load.
    (6) Full scale, load is shunt only.

    PREVIOUS TOP NEXT
    Products • Support • Literature • Contact Us • Careers • About

    KEPCO, INC. • 131-38 SANFORD AVENUE • FLUSHING, NY. 11355 U.S.A.
    TEL (718) 461-7000 • FAX (718) 767-1102
    www.kepcopower.com • email: hq@kepcopower.com