SERIES BOP HIGH POWER
 |
TOUR
|
| MODELS |
 |
| FEATURES |
| FUNCTION GENERATOR CHARACTERISTICS |
| LOCAL OPERATION |
| CONTROL |
| INTERFACE CHARACTERISTICS |
|
PROGRAMMING/ DISPLAY CHARACTERISTICS
|
| GENERAL SPECIFICATIONS |
| INPUT CHARACTERISTICS |
| OUTPUT CHARACTERISTICS |
| PHYSICAL CHARACTERISTICS |
| MANUALS |
| BOP 1 KILOWATT PROGRAMMING/DISPLAY CHARACTERISTICS | |||
| SPECIFICATION | RATING | DESCRIPTION | |
| Trigger Port pin 2 |
shutdown (pin 2) has three functions: | ||
| external
trigger shutdown default |
Isolated input far setting the BOP in STANDBY (output off) (latched status) |
Pulse width: 100 microseconds min. Action delay: 200 microseconds max. Restore operation by pressing STANDBY key(1) or sending OUTP ON command via remote interface. |
|
| output on-off control input |
Isolated input for controlling output status, on or off |
Action delay: 100 μS max. Signal logic established by 0UTP:CONT command or from front panel |
|
| disabled | Disables external trigger shutdown and output on-off control input | ||
| Trigger Port pin 4 |
external trigger input (pin 4) | lsolated input for trigger events | Pulse width: 100 microseconds min. Action delay: 500 microseconds max. |
| Digital Control |
local | Panel-mounted keypad(1) | Direct entry |
| remote | IEEE 488-2 (GPIB) | SCPI | |
| remote | RS 232 | SCPI | |
| remote | LXI Ethernet (LAN) | SCPI | |
| remote | RS 485 (BITBUS) | Used for series and parallel configurations | |
| Display(1) | front panel | 4.7 inch backlit 16-bit color LCD, displays all functions | |
| remote (MG and GL) |
All parameters read back on RS 232 and GPIB buses | ||
| remote (ME and EL) |
All parameters read back on LAN and RS 232 ports | ||
| (1) | References to keypad and display apply only to MG and ME models. |
