|
KLN SERIES PHYSICAL CHARACTERISTICS 5KW, 10KW, 15KW |
||
| Weight | 5KW: | Approximately 66 lbs (30 Kg) |
| 10KW: | Approximately 82 lbs (37 Kg) | |
| 15KW: | Approximately 102 lbs (46 Kg) | |
| Dimensions: W x H x D: | 19" x 5.2" x 35" (482mm x 132mm x 889.5mm) | |
| Source Power Connections | 5KW, 10KW: | Rear panel L1, L2, L3 terminals for 3-wire connections |
| 15KW: | Rear panel L1, L2, L3 terminals for 3-wire connections | |
| Load Connections | Rear panel ± bus bars with protective cover (supplied) | |
| Sense connections | Rear panel ±S terminals | |
| Auxiliary port | Dsub connector, 9 pins: Interlock, external output ON/OFF and shut OFF controls, alarm and Output voltage downward status | |
| LAN port (standard) | Built-in 2-port rear panel ethernet hub (1.5m Ethernet cable supplied) | |
| GPIB port (Optional) | Rear panel GPIB connector | |
| USB connection (Optional) (1) | Requires optional Serial Port (RS 422/RS 485) with optional RS 485/USB Converter | |
| Serial (RS 422/RS 485) port (Optional) (1) | Rear panel connectors (2) | |
| Isolated Analog port (Optional) | Rear panel 25-pin connector | |
| Synchronization | Rear panel connectors (2) - Ensures proper operation in parallel configurations | |
| Current Share | Rear panel connectors, 2-pin (2) - required for proper current sharing among parallel-connected units (two mating 2-pin pluggable terminal blocks supplied) | |
| Programming Sequence port | Front panel USB connector for uploading program sequences | |
| NOTES: | |
| (1) | USB and Serial Port (RS 422/RS 485) options are currently under development. |
