| SERIES HSP INPUT CHARACTERISTICS | |||
| Specification | Rating/Description | Condition | |
| a-c voltage, 1000W Models |
Nominal: | 100-250 Va-c | Single phase |
| Range: | 90-277 Va-c | Wide Range | |
| a-c voltage, 1500W Models |
Nominal: | 200-250 Va-c | Single phase |
| Range: | 180-277 Va-c (2) | Wide Range | |
| d-c voltage (1) | 1000W: | 125-420 Vd-c (1) | Polarity insensitive |
| 1500W: | 250-420 Vd-c (1) | Polarity insensitive | |
| Brownout Voltage |
1000W: | 75 Va-c | |
| 1500W: | 150 Va-c | ||
| Source Frequency |
Nominal: | 50-60 Hz | > 63Hz, input leakage current exceeds tabulated value |
| Range: | 47-440 Hz | ||
| Source Current |
`120V a-c: | 1000W: 11.0A rms | Typical |
| 240V a-c: |
1000W: 5.5A rms 1500W: 8.0A rms |
||
| Power Factor (PF) | `Typical: | 0.99 | Any source, 25% to 100% load |
| Minimum: | 0.96 | ||
| (1) | Safety approval is for a-c operation only. |
| (2) | For operation of HSP 1500W with lower than nominal mains voltage, refer to Figure below for temperature and power derating; safety agency approvals are not applicable. |
