| SERIES JQE GENERAL SPECIFICATIONS | |||
| Specification | Rating/Description | Condition | |
| INPUT | |||
| a-c Voltage | 105-125, 210-250V a-c | User Selectable (1) | |
| Current | See Model Table | Max load, 115V a-c | |
| Frequency | 47-65Hz | Range | |
| OUTPUT | |||
| d-c Output | Series pass | Transistor | |
| Type of styabilizer | Voltage Stabilizer | Current limited | |
| Voltage | 0 to 100% of rating |
Adjustment range for temperature 0 - 71°C |
|
| Current | 0 to 100% of rating | ||
| Error sense | 0.5V per load wire | Static voltage allowance | |
| Isolation voltage | 500V d-c or peak | Output to ground | |
| Isolation voltage | 500V d-c or peak | Output to ground | |
|
Leakage current
Output to ground |
<5 microamperes | rms at 115V a-c | |
| <50 microamperes | p-p at 115V a-c | ||
| Series connection | 500V | Max voltage off ground | |
| Parallel connection | Automatic | Use current mode limiting | |
| Current Sharing | Use master/slave connection | ||
| Redundancy type | External steering diodes | ||
| OVP | Not available | ||
| Meter Accuracy |
Digital Meters (DM suffix Models) |
1% of Full Scale | Voltage Mode |
| 1.5% of Full Scale | Current Mode | ||
| Analog Meters (M suffix models: |
3% of Full Scale | Voltage Mode | |
| 3% of Full Scale | Current Mode | ||
| CONTROL | |||
| Type | Voltage: | Fixed input, variable gain | |
| Current: | Differential comparison | ||
| Voltage | Local: | 10-turn precision rheostat | |
| Remote Analog: |
1000 Ohms per Volt or 0 to 1mA current control |
||
| Remote Digital: | Use SN or SNR interface | 12-bit Listen-only | |
| Curent | Local: | Multiturn pot | |
| Remote Analog: | Not provided. | See Series ATE models. | |
| Dynamics | Normal (slow): | dV/dt = I/C | See tablulated value of C in Model Table |
| Fast mode: | Not provided. | See Series ATE models. | |
| (1) | Except 1/4 Rack Models which must be returned to the factory for selection. |
