SERIES BOP
|
|
TOUR
|
|
| MODELS | |
| TUTORIAL VIDEO | |
 |
|
 |
|
| FEATURES | |
| REAR PROGRAMMING CONNECTORS |
|
| GENERAL SPECIFICATIONS |
|
| STATIC SPECIFICATIONS |
|
| DYNAMIC SPECIFICATIONS |
|
| OUTLINE DIMENSIONS |
|
| MANUALS | |
| BIT CARDS (REMOTE CONTROL) |
| SERIES BOP GENERAL SPECIFICATIONS | |||
| Specification | Rating/Description | Condition | |
| INPUT | |||
| a-c Voltage |
95-113, 105-125, 190-226, 210-250V a-c |
User selectable | |
| Current | See Table | Max load, 115V a-c | |
| Frequency | 47-65 Hz | Range | |
| OUTPUT | |||
| d-c output | Bi-direction, series pass | Transistor (1) | |
| Type of Stabilizer | Automatic crossover | Voltage/current | |
| Voltage | 0 to 100% of rating (bipolar) |
Adjustment range for temp. 0-55°C |
|
| Current | 0 to 100% of rating (bipolar) | ||
| Sink | See source/sink plot | Duty cycle | |
| Error sense | 0.5V per load wire | Voltage allowance | |
| Isolation voltage | 500V d-c or peak | Output to ground | |
| Leakage current, output to ground |
rms: | <5 microamperes (2) | 115V a-c, 60Hz |
| p-p: | <50 microamperes (2) | ||
| Series connection | 500V | Maximum voltage off ground | |
| Parallel connection | Current sharing | Use master/slave connection | |
| OVP | Not available | ||
| CONTROL | |||
| Type | Voltage: | Variable input, fixed gain | |
| Current: | Differential comparison | ||
| Voltage/Current | Local: | 10-turn, zero-center pot | |
| Remote Analog: | -10V to +10V | ||
| Local Digital: | Serial bus, GPIB, VXI or Ethernet/LAN | Optional internal BIT card | |
| Remote Digital: | Use SN or SNR interface | ||
| Bounding | Local: | ±Voltage/Current | Four screwdriver trimmers |
| Remote: | ±Voltage/Current | 0 to 10 Volts | |
| Dynamics | See Dynamic Specifications | Fast only. | |
| User Amplifiers | Uncommitted, gain 20K | Two provided. | |
| References | ±10 Volts, 1mA | Two provided. | |
| Options (built-in) (User-added BIT cards also available) |
Talk/listen IEEE 488 (SCPI) |
GPIB/RS 232 card | Suffix -4886 |
| LAN/web page (SCPI) | Ethernet control card | Suffix -802E | |
| Serial (SCPI) | GPIB/RS 232 card | Suffix -4886 | |
| Serial long range | VXI card | Suffix -TMA | |
| GPIB hex | GPIB hex card | Suffix -488B | |
| GPIB BCD | GPIB BCD card | Suffix -488D | |
| MECHANICAL | |||
|
Input connection (See plug patterns) |
Detachable IEC type, 3-wire | All models | |
| Output connections | Front signal/output | Binding posts | |
| Rear user port | 50-terminal connector | ||
| Rear output | Barrier strip | ||
| Meters |
Two 2-1/2-inch horiz., 2%, zero-center, analog |
Front panel (digital meter optional) |
|
| Indicators | Four LEDs | Voltage/Current/Bounding | |
| Mounting (in std. 19-inch racks) |
3/4 rack size: | Use RA 37 Rack Adapter. | |
| Full rack size: | Mounting ears supplied. | ||
| Dimensions: H x W x D (add 2-1/2" for rear connector) |
3/4 rack size: |
5-7/32 x 12-17-32 x 17-9/64 132.6 x 318.3 x 435.4 |
inches mm |
| Full rack size: |
5-7/32 x 19 x 20-5/64 132.6 x 482.6 x 510 |
inches mm |
|
| Finish |
Light gray, Fed Std. 595, Color 26440, |
Front panel | |
|
Weight (packed for shipment) |
47lbs (21.4Kg) | 3/4 Rack Size (100W) | |
| 53lbs (24.1Kg) | 3/4 Rack Size (200W) | ||
| 76lbs (34.5Kg) | Full Rack Size | ||
| ENVIRONMENTAL | |||
| Humidity | 0 to 95%RH | Non-condensing | |
| Humidity | 0 to 95%RH | Non-condensing | |
| Cooling | Forced air, Internal a-c fan | Intake from top and sides, exhaust to rear | |
| Shock | 20g/ 11ms/ 50% half sine | Non-operating | |
| Vibration |
5-10Hz: 10mm, double amplitude 10-55Hz: 2g |
Non-operating | |
| Altitude | Sea level to 10,000ft | For operating temperature range | |
| (1) | 200V model uses FET. |
| (2) | For BOP 5-20DL: Leakage current is 0.05mA rms, 5mA p-p. |
