| SERIES KLR OUTPUT CHARACTERISTICS | |||
| Specification | Rating/Description | Condition | |
| Type of Stabilizer | CV/CC | Voltage/Current | |
| Adjustment Range |
Voltage: | 0-100% of rated voltage | No minimum load required. |
| Current: | minimum to 100% of rated current | No minimum load required. See Model Table for minimum programmable current. | |
| Source effect | Voltage: | 0.01% Emax | Over full source range. |
| Current: | 0.01% Imax | ||
| Load effect | Voltage: | 0.02% Emax | Over full load current range. |
| Current: | 0.05% Imax | ||
| Temperature effect |
Voltage: | 0.01%/deg C | 0-50 deg C |
| Current: | 0.01%/deg C | ||
| Time effect (drift) |
Voltage: | 0.02%/24hr | After 30 min warmup. |
| Current: | 0.02%/24hr | ||
| Error Sensing | 0.25 volts per wire | Above rated output. Contact factory for larger margins. | |
| Isolation Voltage |
600V d-c or peak (100V for 20V and 40V models) |
Either output terminal to ground. | |
| Transient recovery for load change |
Excursion: | 1% of Emax | 50% load step 2A/microsecond max. |
| Recovery: | 2 msec | 10% min. load; return to 0.1% of setting. | |
| Turnon/turnoff overshoot | 2% max | Rated output, any load | |
| Rise Time | Voltage: | 20V, 40V: 30 msec 75V: 40 msec 150V: 50 msec 300V: 60 msec |
0 - Emax, rated load (resistive) |
| Current: | 20V, 40V: 30 msec 75V: 40 msec 150V: 50 msec 300V: 60 msec |
0 - Imax, rated load (resistive) | |
| Fall Time | Voltage, no load: |
20V: 525 msec 40V: 975 msec 75V: 2820 msec 150V: 4850 msec 300V: 4400 msec |
Emax - 0, no load (open circuit). (For improved performance, see RODC option) |
| Voltage, rated load: |
20V, 40V: 30 msec 75V: 40 msec 150V: 50 msec 300V: 60 msec |
Emax - 0, rated load (resistive) | |
| Current: | 20V, 40V: 30 msec 75V: 40 msec 150V: 50 msec 300V: 60 msec |
Imax - 0, rated load (resistive) | |
|
Overvoltage protection |
Programmable 20-120% of Emax |
User selectable recovery (1) | |
|
Overcurrent protection |
Programmable 72-120% of Imax |
User selectable recovery (1) | |
| Output lead wire protection | Shutdown | User selectable recovery (1) | |
| Parallel Operation | Active load sharing within 5% of I0 rated | Up to 5 units maximum (2) | |
| (1) | Either PROTECTED (output disabled and locked until source power recycled) or SAFE (output disabled with unit programmed to last setting; power recycling not needed for recovery). |
| (2) | E-Series models are not Master/Slave capable. |
