Follow @kepco_careers
Advanced Search
Kepco Power Solutions
718-461-7000
   SERIES KLP INPUT CHARACTERISTICS
Specification Rating/Description Condition
a-c voltage Nominal: 100-240 Va-c Single Phase Single phase
Range: 90-265 Va-c Wide Range
Input
Frequency
Nominal range: 50-60 Hz  
maximum: 45-440 Hz Increased Leakage above 66 Hz.
Power Factor (PF) typical 0.99 Meets EN 61000-3-2.
Maximum Input
Current
120 Va-c: 13A rms Rated load (1200W)
240 Va-c: 6.5A rms Rated load (1200W)
Inrush current 265 Va-c: 40A Peak
132 Va-c: 20A Peak
Input Fusing Circuit breaker 2-line
Low a-c protection 87V a-c, Self protected  
Output holdup typical: 10 milliseconds Ride through
Leakage Current 115 Va-c, 60 Hz: 1.2mA max.  
230 Va-c, 50 Hz: 2.3mA max.  
Electromagnetic
compatibility
Emissions: CISPR11, Class A Class B Conducted
Immunity: EN 61326-1, Table 2 Industrial Environment
Withstand
Voltage
Input - Chassis: 2121V d-c (all models)  
Output - Chassis: 1250V d-c (10V, 20V, 36V models)
2121V d-c (75V, 150V, 300V, 600V models)
Input - Output: 2500V d-c (10V, 20V, 36V models)
4242V d-c (75V, 150V, 300V, 600V models)

(1) Safety approval is for a-c operation only.
(2) For operation of HSP 1500W with lower than nominal mains voltage, refer to Figure below for temperature and power derating; safety agency approvals are not applicable.
PREVIOUS TOP NEXT

ProductsSupportLiteratureContact UsCareersAbout

KEPCO, INC. • 131-38 SANFORD AVENUE • FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000 • FAX (718) 767-1102
www.kepcopower.com • email: hq@kepcopower.com