Follow @kepco_careers
Advanced Search
Kepco Power Solutions
718-461-7000
NOTE: Although JBW models are obsolete,
models not listed below are available from stock.
Request quotation!

Recommended replacements are as follows:

Model No Longer Available Recommended Replacement
JBW 10W
Series
GE-35
Series
   
JBW 24-0R5 GE-35-24    
JBW 15W
Series
GE-35
Series
   
JBW 05-3R0 GE-35-05    
JBW 24-0R7 GE-35-24    
JBW 30W
Series
MP-35
Series
GE-35
Series
 
JBW 05-6R0 N/A GE-35-05  
JBW 24-1R3 MP-35-24 GE-35-24  
JBW 50W
Series
AK-75
Series
GE-50
Series
RTW 50W
Series
JBW 24-1R1 AK-75-24 GE-50-24 RTW 24-2.2K

   JBW PROGRAMMABLE MODEL TABLE
MODEL OUTPUT
VOLTAGE
Volts
SETTING
TOLERANCE
Volts
OVP
SETTING(5)
Volts
OUTPUT
CURRENT(1)
Amps
CURRENT
LIMIT(2)
Amps
SWITCHING
RIPPLE
mV p-p
NOISE
mV p-p
EFFICIENCY (%)(3) LOAD CAP(4)
100V a-c 200V a-c
10 WATT MODELS
JBW 03-2R0 3.3(7) ±0.16 4.0 2.0(6) 3.0 80 120 68 68 10,000μF
JBW 05-2R0 5 ±0.25 5.75 2 2.5 80 120 71 71 10,000μF
JBW 12-0R9 12 ±0.6 13.8 0.9 1.12 120 150 78 79 5,000μF
JBW 15-0R7 15 ±0.75 17.25 0.7 0.87 120 150 79 80 4,000μF
JBW 24-0R5 24 ±1.2 27.6 0.5 0.62 120 150 82 83 2,000μF
15 WATT MODELS
JBW 05-3R0 5 ±0.25 5.75 3 3.15 80 120 72 72 10,000μF
JBW 12-1R3 12 ±0.6 13.8 1.3 1.37 120 150 76 74 5,000μF
JBW 15-1R0 15 ±0.75 17.25 1 1.05 120 150 76 74 4,000μF
JBW 24-0R7 24 ±1.2 27.8 0.7 0.74 120 150 78 76 2,000μF
30 WATT MODELS
JBW 05-6R0 5 ±0.25 5.6 6 6.3 80 120 75 77 10,000μF
JBW 12-2R5 12 ±0.6 13.3 2.5 2.7 120 150 78 79 2,200μF
JBW 15-2R0 15 ±0.75 16.6 2 2.1 120 150 79 80 4,000μF
JBW 24-1R3 24 ±1.2 26.5 1.3 1.4 120 150 80 81 2,000μF
50 WATT MODELS
JBW 05-10R 5 ±0.5 5.75 10 10.5 80 120 77 79 10,000μF
JBW 12-4R3 12 ±1.2 13.8 4.3 5.4 120 150 80 81 10,000μF
JBW 15-3R5 15 ±1.5 17.2 3.5 4.4 120 150 80 81 10,000μF
JBW 24-2R1 24 ±2.4 27.6 2.4 3.0 120 150 81 83 10,000μF
75 WATT MODELS  RoHS Logo
JBW 5-15K 5 ±0.25(11) 5.75 15 15.8 80 120 75 79 30,000μF
JBW 12-6.3K 12 ±0.6(11) 13.8 6.3 6.6 120 150 78 81 30,000μF
JBW 15-5K 15 ±0.75(11) 17.2 5 5.2 120 150 79 81 30,000μF
JBW 24-3.2K 24 ±1.2(11) 27.6 3.2(8) 4.4 120 150 82 84 30,000μF
100 WATT MODELS  RoHS Logo
JBW 5-20K 5 ±0.25(11) 5.75 20 21 80 120 78 80 30,000μF
JBW 12-8.5K 12 ±0.6(11) 13.8 8.5 10.6 120 150 80 82 30,000μF
JBW 15-6.7K 15 ±0.75(11) 17.2 6.7 8.38 120 150 80 82 30,000μF
JBW 24-4.3K 24 ±1.2(11) 27.6 4.3(9) 5.38 120 150 82 85 30,000μF
150 WATT MODELS  RoHS Logo
JBW 5-30K 5 ±0.25(11) 5.75 30 31.5 80 120 78 80 30,000μF
JBW 12-12K 12 ±0.6(11) 13.8 12 15.7 120 150 81 83 30,000μF
JBW 15-10K 15 ±0.75(11) 17.2 10 12.5 120 150 81 83 30,000μF
JBW 24-6.3K 24 ±1.2(11) 27.6 6.3(10) 7.87 120 150 82 84 30,000μF

(1) Still air rating -10 to +50°C. Derate 30% at 60°C.
(2) Minimum; consult factory.
(3) Typical.
(4) Acceptable added load capacitance, max.
(5) Voltage limited by zener diode across output.
(6) 2.7A peak (allowed for less than 10 Seconds, average current not to exceed 2.0A.
(7) Adjustable from 2.7V to 3.5V d-c.
(8) 4.2A peak (allowed for less than 10 Seconds, average current not to exceed 3.2A.
(9) 5.0A peak (allowed for less than 10 Seconds, average current not to exceed 4.3A.
(10) 7.5A peak (allowed for less than 10 Seconds, average current not to exceed 6.3A.
(11) Adjustable within setting tolerance.

PREVIOUS TOP NEXT


KEPCO, INC. • 131-38 SANFORD AVENUE • FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000 • FAX (718) 767-1102
www.kepcopower.com • email: hq@kepcopower.com