| SERIES HSP CONTROL | |||
| Specification | Rating/Description | Condition | |
|
Voltage set programming (mode selected by internal switches) (isolated) |
Internal: | Multiturn potentiometer | The DC OK /DC FAIL fault window tracks the programmed output voltage, OVP trip unaffected. |
| External 1: |
Resistance: 0- 10K Ohms = 100 - 50% |
||
| External 2: |
Voltage: 0 - 10V = 0 - 100% of rated output voltage |
||
|
Current limit programming (mode selected by internal switches) |
Internal: | Multiturn potentiometer | |
| External: |
Voltage: 0 - 10V = 0 - 110% of rated output current |
||
| Remote On/Off | Normal H: | TTL level | Isolated 5V, 100mA internal pull up supply |
| Normal L: | TTL level | ||
| Forced load share | Single wire connection between modules | 0 - 5.5V signal indicates each module's current | |
